Danh mục sản phẩm
Dịch vụ
Tư vấn và sản xuất cơ khí
Đối tác
Máng lưới – Wire mesh
The Electro-Pneumatic Positioner YT-1000L is used for operation of pnuematic linear valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or split ranges.
The Electro-Pneumatic Positioner YT-1000L is used for operation of pnuematic linear valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or split ranges.
Simple zero and span adjustment
No resonance between 5-200Hz
Auto/Manual switch
Internal feedback signal is available as an option (weather proof only)
Specifications
Category |
YT-1000L |
||
Single |
Double |
||
Input Signal |
4~20mA DC *1 |
||
Impedance |
250±15Ω |
||
Supply Pressure |
1.4~7.0kgf/cm2 (20~100 psi) |
||
Stroke |
10~150mm *2 |
||
Air Connection |
PT(NPT) 1/4 |
||
Gauge Connection |
PT(NPT) 1/8 |
||
Conduit Entry |
PF 1/2 or G 1/2 |
||
Explosion Proof *3 |
Domestic : ExdmIIBT5, ExdmIICT5, ExiaIIBT6 ATEX: EExmdIIBT5, JIS : ExsdIIBT5 CSA : ExmdIIBT5 |
||
Protection |
IP66 |
||
Ambient Temperature |
Operating |
-20∼70℃, -40∼60℃, -20∼120℃ |
|
Explosion |
-20~60℃ |
||
Linearity |
±1.0% F.S |
||
Hysteresis |
1.0% F.S |
||
Sensitivity |
±0.2% F.S |
±0.5% F.S |
|
Repeatability |
±0.5% F.S |
||
Air Consumption |
3LPM (Sup=1.4kgf/cm2 ,20psi) |
||
Flow Capacity |
80LPM (Sup=1.4kgf/cm2 ,20psi) |
||
Material |
Aluminum Diecasting |
||
Weight |
2.7kg(6.1lb |
Tested under ambient temperature of 20℃, absolute pressure of 760mmHg, and
humidity of 65%. Please contact us for more detailed specification.
1: For 1/2 Split Control, it can be applied by adjusting zero and span.
2: For inquiry regarding strokes under 10mm or above 150mm, please contact YTC.
3: YT-1000L has different types of explosion proof certificates.
Please make sure to check explosion proof grade.
Các sản phẩm cùng loại |